I see colors: Peacock Feathers

I started out with a forest in mind: very dark mahogany (DMC 300) with very dark turquoise (DMC3809). But once it was stitched, rather than leaves, I saw peacock feathers. So I added a flourish with royal blue (DMC 797) and French knots of very dark shell pink (DMC 208). I am very happy with the results.

I intended to make a diamond ornament, but stitched the margin too close to the design. Thus the ragged edge.

I think it will look amazing in reds, oranges and yellows. Next time.

New Free Pattern

I've been having so much fun with colored pencils on blackwork that I came up with a pattern especially for the method:

Star Window is a small, simple pattern that is easy to stitch and fun to color.

You'll find it on the Blackwork Smalls page.


I also pulled a bunch of samples from my stitching box and have transformed them using colored pencils. I have learned a few things along the way:

1) Don't overdo the color. Many pieces can get weighed down and look muddy with too much color.

Just a hint of color makes the facets of Snowflake Mandala pop!

2) Dampen the cloth, then roll it in a towel to remove excess moisture. A slightly damp canvas makes the color more vibrant. Be careful not to get it too wet; the colors can and will bleed if you're not careful.

I didn't like this pattern at all when I first designed it.
The bright colors have given a boring and clinical -looking
pattern a lively new look.

3) Keep the pencils sharp. Or not. It depends.

A dampened, duller pencil is great for filling in larger areas,
but as you can see, a fine point is needed to get the color
into the nooks and crannies.

4) It's okay to blend colors. In fact, it can lead to some exciting effects.

I was unhappy with the blue I had chosen for the small balls;
they were too bright for the green and gray. I colored over them
with the gray and got a fascinating patina. It wasn't so successful
with the purple, but I think that I used too heavy a hand with the
purple to begin with.

5) You may need a second coat.

After the first coat. Look at the first photo again and
you can see how much I missed. 

6) Keep a Tide Stain Stick handy. I got a smudge of color in the wrong spot and the Tide Stain Stick saved the day!

I'm contemplating using some sort of finish in addition to heat-setting the color. Something to protect it from the elements. Any ideas? Let me know.

Using Metallic Floss

Metallic thread is a must for holiday stitching. It's a fun way to make your needlework sparkle.

If you haven't used metallics before, now is a great time to start. Don't be nervous; it takes a little practice and patience, but if you follow my guidelines, you'll find it's a lot easier than you think.

1) Keep the thread length short--about 12 inches.

2) Use a size 24 needle. Smaller needles can cause extensive fraying.
3) Condition the thread with Thread Heaven or beeswax.

4) If using two strands, thread the needle with a single thread folded in half. Make a slipknot at the head of the needle. If using a single thread, keep the tail short.

45 The needle will cut at the thread and cause it to fray. To reduce that effect, as soon as you have the needle through the fabric, let go of the needle and pull the thread through. Not only does it put less tension on the thread, it also keeps the thread from twisting.

6) Try to keep the thread from rubbing too much against the fabric. Friction against the fabric will weaken the thread and start fraying. Pull straight through the hole.

7) Good tension is essential. I recommend a laying tool or trolley needle to help make the threads lie flat so they can reflect the most light. Pulling too tight can cause kinks (especially in DMC Light Effects) and will kill the sparkle, too.

My favorite metallics for blackwork are Kreinik braid and blending filaments. DMC Light Effects is nice for cross stitch. 

Give it a try and see what magic you can create with metallic thread!